Quick overview
Job description
About Us:
Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environment a Job Duties: l, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery.
Since 1957 we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently.
Job Summary:
The Electrical Integration QC Inspector is responsible for verifying the quality, accuracy, and completeness of electrical installation and integration activities within e-houses, modular electrical buildings, switchgear assemblies, power distribution units (PDUs), relay panels, control panels, and associated electrical systems. This position performs in-process and final inspections of electrical equipment installation, cable and conductor routing, terminations, grounding and bonding, panel interfaces, wire identification, electrical connections, and applicable test documentation. The inspector verifies compliance with approved electrical drawings, wiring diagrams, bills of materials (BOMs), customer specifications, manufacturer instructions, applicable codes, and company quality procedures. The inspector works closely with Electrical Production, Electrical Engineering, Testing, Assembly QC, and the QC Supervisor to identify discrepancies early, prevent nonconforming work from advancing, verify corrective actions, and ensure electrical assemblies are ready for designated testing and final release.
Job Duties:
- Review approved drawings, wiring diagrams, BOMs, customer specifications, and manufacturer instructions; confirm materials are correct, prior inspections are complete, and open nonconformances are dispositioned before work proceeds.
- Inspect installation of switchgear, PDUs, transformers, relay and control panels, and other equipment for correct parts, ratings, orientation, mounting, clearances, and service access.
- Inspect wire and cable routing, support, segregation, bend radius, protection, identification, and terminations against wiring diagrams and cable schedules.
- Verify grounding and bonding connections, conductor sizes, surface preparation, and torque documentation; coordinate continuity and bonding tests with qualified personnel.
- Verify panel wiring, device tags, terminal numbering, and labels against schematics and terminal plans; coordinate point-to-point verification and functional checks.
- Confirm required inspections are complete before testing; witness or verify specified electrical tests and review results, test equipment calibration, and acceptance criteria.
- Ensure failed tests are documented, affected work is held, and corrective action and retesting are completed.
- Inspect for electrical safety hazards, missing barriers or covers, required labeling, and debris or foreign objects in enclosures; immediately escalate critical safety concerns.
- Identify and document defects, place nonconforming work on hold, and initiate NCRs with drawing references, photographs, and measurements or test results.
- Notify the QC Supervisor, Electrical Production, and Engineering of significant defects or drawing conflicts; do not independently approve substitutions or deviations, perform energized testing, or authorize energization outside approved qualifications and procedures.
- Verify completed rework and identify recurring defects for corrective action.
- Complete inspection checklists, travelers, torque records, NCRs, and test documentation, maintaining traceability to equipment, project numbers, and drawing revisions.
- Confirm hold points and records are complete before work advances; perform final integration inspections before testing, customer inspection, or release.
- Communicate inspection status, open issues, and release restrictions during daily production meetings.
- Experience in electrical quality inspection, electrical assembly, industrial manufacturing, or a related field.
- Experience with e-houses, switchgear, motor control centers, PDUs, relay panels, control panels, or industrial electrical enclosures.
- Experience with electrical torque verification and manufacturer torque specifications.
- Familiarity with point-to-point checks, continuity testing, insulation resistance testing, and grounding verification.
- Familiarity with applicable NEC requirements, relevant UL standards, NETA testing requirements where applicable, and customer-specific electrical specifications.
- Experience with NCRs, inspection travelers, corrective actions, and ISO 9001 quality management systems.
- Electrical training, relevant inspection certifications, or other qualifications required by applicable customer or project requirements.
- Ability to read and interpret electrical schematics, wiring diagrams, panel layouts, and point-to-point drawings.
- Knowledge of electrical components, conductor identification, terminations, grounding, bonding, and general electrical workmanship.
- Ability to use basic inspection and measuring tools and follow documented inspection procedures.
- Ability to complete quality records accurately and communicate discrepancies clearly.
- Understanding of safe work practices around electrical equipment.
Work Environment:
- This position is based at the West Houston, Texas facility (PES, non-union).
- Work is performed primarily in the e-house electrical integration and test areas on the production floor, including inside e-houses and around switchgear, panels, and electrical enclosures, with office time for inspection records, NCRs, test documentation, and reporting.
- Regular exposure to manufacturing conditions, including noise, dust, overhead cranes, forklifts, power tools, and seasonal temperature variation, as well as work near electrical equipment during testing under approved safety procedures; required personal protective equipment (PPE), including arc-rated PPE where specified, must be worn.
- Requires frequent standing, walking, bending, kneeling, reaching, and climbing ladders, stairs, and elevated work platforms to inspect equipment, cable trays, and enclosures, including work in tight spaces, as well as use of inspection and measuring instruments. Ability to distinguish wire colors and read small markings is required. Elevated inspections may require use of fall protection.
- Occasional extended hours may be required to support production schedules and customer delivery commitments.
- Medical, dental, vision, HSA, term life, AD&D, STD, LTD
- 100% medical premium paid for by Panelmatic for the employee-only level medical coverage
- 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family)
- 401(k) contributions matched 100% up to 4%
- Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided
- PTO and paid holidays provided
- Career advancement opportunities
- Competitive wages
- Family-friendly environment with average employee tenure above five years
Haystack's AI agent can fill in and submit this application for you. How AI auto apply works
Similar jobs
- BT

Quality EngineerRecently posted Auto Apply
Blackwave Texas Inc. · San Antonio · On-site · Posted 17 Nov 2026 🇺🇸
ComplianceContinuous ImprovementProcurement+2EngineeringSalary not listed - YT
Analyst, Quality ControlRecently posted Auto Apply
Yowei Therapeutics · Milpitas, California · On-site · Posted 17 Nov 2026 🇺🇸
Clinical TrialsCompliancePharmacy$20k/yr - EV

Quality Systems Engineer - FlashBlade and FlashArrayRecently posted Auto Apply
Everpure · Santa Clara · Hybrid · Posted 17 Nov 2026 🇺🇸
OpenStackOracleSQL+6Technology$217k/yr - CA

Vehicle Condition AssociateRecently posted Auto Apply
Carvana · University Park · Hybrid · Posted 17 Nov 2026 🇺🇸
Automotive$20/hr - UI

Testing and Commissioning TechnicianRecently posted Auto Apply
United Integrated Services (USA) Corp. · Phoenix · Hybrid · Posted 17 Nov 2026 🇺🇸
WorkdayMicrosoft ExcelMicrosoft Office+6Salary not listed - KI

QC Inspector of Fabrication - Night ShiftRecently posted Auto Apply
Kelso Industries · Duncan · Hybrid · Posted 17 Nov 2026 🇺🇸
AWSComplianceHVACSalary not listed - WE

Crux - Video and Audio Raters - English (US)Recently posted Auto Apply
Weloglobal · United States · Remote · Posted 17 Nov 2026 🇺🇸
$20/hr - CO
Inspector II (Grader)Recently posted Auto Apply
Continental · Sumter, SC · On-site · Posted 17 Nov 2026 🇺🇸
ManufacturingSalary not listed - CO
Service InspectorRecently posted Auto Apply
City of New York · Middle Village, NY · On-site · Posted 17 Nov 2026 🇺🇸
TechnologySalary not listed - TB
Quality Engineer, Change ManagementRecently posted Auto Apply
Twist Bioscience · USA - South San Francisco · Hybrid · Posted 17 Nov 2026 🇺🇸
ComplianceRisk ManagementEngineering$104k - $127k/yr - TB
Quality Engineer, Change ManagementRecently posted Auto Apply
Twist Bioscience · USA - Portland · Hybrid · Posted 17 Nov 2026 🇺🇸
ComplianceRisk ManagementEngineeringSalary not listed - MF

Senior QC Inspector – Warehouse Auto Apply
Maxwood Furniture · Marion · On-site 🇺🇸
LogisticsSalary not listed