Quick overview
Job description
Today, everything we send to space is constrained by what fits inside a rocket fairing. That's a fundamental bottleneck to building more capable spacecraft. Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles: modular spacecraft components that rendezvous, dock, and latch to assemble bigger and more powerful spacecraft than anything that can be folded to fit into a rocket.
We're a small team based in Golden, Colorado, executing on a clear path from flight demonstration to our first operational systems. Our work spans hardware, software, and systems engineering. We are looking for the best people in the world who want to build the next generation of advanced spacecraft.
Responsibilities & Ownership
- Own the PCBA and harness stations as part of the production process: station layout, tooling and consumables, work instructions, throughput, and first-pass yield. Hardware leaving your stations is built to drawing, and you are accountable for it.
- Help build out the manufacturing process: define the tile build flow with manufacturing engineering, write and validate work instructions in our manufacturing execution system (MES), run first-article builds, and turn the lessons from each build into procedure and tooling updates.
- Assemble, rework, and inspect printed circuit board assemblies to IPC-A-610 / J-STD-001 Class 3 workmanship: stencil printing, reflow, fine-pitch hand soldering, component rework, cleaning, and conformal coating.
- Build, route, and test wire harnesses and cable assemblies from drawings and wire lists to IPC/WHMA-A-620: cutting, stripping, crimping with calibrated tooling, pinning, labeling, and continuity / isolation testing.
- Perform light mechanical assembly of flight and development hardware: fastener installation and torque, threaded insert installation, bonding and staking, and fit checks against drawings.
- Execute work orders and procedures in the MES, record as-built data and serial numbers, and file anomaly reports when something does not match the drawing.
- Help bring up our in-house SMT line: stencil printer setup and evaluation, reflow oven profiling, first-article builds, and the work instructions that make them repeatable.
- Maintain ESD, FOD, and cleanliness controls in the work area; keep tools calibrated, checked out, and accounted for.
- Support test campaigns: build test fixtures and cabling, set up data acquisition, and assist test engineers during functional and environmental tests.
- Train and mentor associate technicians and review their work before it moves to the next station.
Basic Qualifications
- High school diploma or equivalent.
- 5+ years of hands-on experience assembling and reworking PCBAs and wire harnesses in a production or prototype environment.
- Current IPC J-STD-001 and IPC/WHMA-A-620 certification, or the ability to obtain certification within 90 days of hire (IPC-A-610 a plus).
- Demonstrated fine-pitch soldering and rework skill under a microscope (0402 passives, QFN/QFP, and similar).
- Ability to read and work from schematics, assembly drawings, wire lists, and written procedures, and to flag discrepancies before building to them.
- Working knowledge of ESD control (ANSI/ESD S20.20 or equivalent program) and FOD prevention.
- Comfortable with basic bench instruments: multimeter, power supply, and oscilloscope for continuity, isolation, and go/no-go checks.
- U.S. person status required (see below).
Preferred Qualifications
- Experience building spacecraft, satellite, aircraft, or other flight hardware, including the documentation discipline that comes with it (traveler sign-off, as-built records, nonconformance reporting).
- IPC J-STD-001 Space Addendum, NASA-STD-8739 series, or similar high-reliability workmanship training.
- Experience operating or setting up SMT equipment: stencil printers, pick-and-place, reflow ovens, or inspection systems.
- Familiarity with conformal coating, potting, staking, and other board-level protection processes.
- Experience with an MES, ERP, or similar system for work orders and inventory.
- Forklift or overhead crane certification; comfortable with safe lifting and rigging of hardware.
- Experience defining or improving a production process: authoring work instructions, first-article builds, yield improvement, 5S, or lean manufacturing.
- Experience in a startup or small-team environment where you helped define the process rather than inherit it.
Compensation and Benefits
Engineer (Early Career): $80,000 - $110,000
ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
Equal Opportunity
Rendezvous Robotics is an Equal Opportunity Employer; employment with Rendezvous Robotics is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Haystack's AI agent can fill in and submit this application for you. How AI auto apply works
Will your resume get past this employer's screening? Check your resume against this job, free
Similar jobs
- AI

Senior Staff Data Scientist - Reputation (Inference)Recently posted Auto Apply
Airbnb · United States · Remote · Posted 22 Nov 2026 🇺🇸
SQLPythonProject ManagementTechnology$232k - $290k/yr - CL

Founding Applied AI EngineerRecently posted Auto Apply
Clera · United States · On-site · Posted 22 Nov 2026 🇺🇸
Next.jsLLMPython+3Technology$180k - $230k/yr - RE

Founding Solutions Engineer, EMEARecently posted Auto Apply
Resolveai · United States · Remote · Posted 19 Nov 2026 🇺🇸
GitAWSSplunk+4TechnologySalary not listed - CA

QA Engineer, MarTechRecently posted Auto Apply
Court Avenue · Office - Minneapolis · Hybrid · Posted 22 Nov 2026 🇺🇸
GitGraphQLPlaywright+4Technology$65k - $80k/yr - TT
Robotics Infrastructure EngineerRecently posted Auto Apply
True Talent Solutions Partners · Pittsburgh · On-site · Posted 22 Nov 2026 🇺🇸
DockerGCPAWS+5Technology$100k - $300k/yr - TT
Infrastructure EngineerRecently posted Auto Apply
True Talent Solutions Partners · New York · On-site · Posted 22 Nov 2026 🇺🇸
GCPAWSData Pipeline+5Technology$150k - $300k/yr - TT
Principal Software Engineer, PerceptionRecently posted Auto Apply
True Talent Solutions Partners · Alameda · On-site · Posted 22 Nov 2026 🇺🇸
RoboticsComputer VisionC+++2Technology$300k - $380k/yr - TT
Solutions EngineerRecently posted Auto Apply
True Talent Solutions Partners · San Francisco · On-site · Posted 22 Nov 2026 🇺🇸
PythonMachine LearningTechnology$120k - $150k/yr - TT
Senior Solutions Engineer, Digital Native and Mid-MarketRecently posted Auto Apply
True Talent Solutions Partners · United States · Remote · Posted 22 Nov 2026 🇺🇸
GitCircleCIGitHub Actions+2Technology$147k - $175k/yr - TT
Mid/Senior Full Stack AI EngineerRecently posted Auto Apply
True Talent Solutions Partners · San Francisco · On-site · Posted 22 Nov 2026 🇺🇸
Next.jsERPCross-selling+6Technology$180k - $250k/yr - TT
Staff Full-Stack Engineer, Core ApplicationRecently posted Auto Apply
True Talent Solutions Partners · Oakland · On-site · Posted 22 Nov 2026 🇺🇸
DynamoDBFlaskNestJS+5Technology$240k - $275k/yr - TT
Robotics Software EngineerRecently posted Auto Apply
True Talent Solutions Partners · Watertown · On-site · Posted 22 Nov 2026 🇺🇸
DockerEmbedded SystemsRobotics+6Technology$130k - $180k/yr
