
Manufacturing Engineer - 3rd Shift / Weekend Crew - Plant 3
Quick overview
Job description
This off-shift Manufacturing Engineer will be located in Plant 3, Whitehall Casting Operation, and will support manufacturing by providing focused projects that will improve throughput, reduce inventory & reduce operating expense. This position will drive reduction of labor costs through cellular manufacturing and new/improved methods & equipment. Must be able to apply standard practices and techniques, adjust and correlate data, recognize discrepancies in results and take corrective action. Will document work, prepare technical notes/reports/documents and establish customer contacts (internal & external) as required.
Responsibilities
This position is responsible for developing manufacturing methods to produce parts that consistently meet or exceed our customers’ requirements. Also, continuous improvement of processes by improving methods and developing new methods of manufacturing, leading to increased yields and reduced labor content.
- Conceives, evaluates and implements problem solving activities, cost reduction initiatives and part/process improvement activities.
- External customer escapes - Investigates and analyzes root cause. Develops and implements correction action plans.
- General Technical Support - Collects data and answers customer requests.
- Quotation Prep - Develops material, scrap and labor costs for cost modeling.
- Tooling Development and Build - Attends NPI meeting and provides input based on customer specifications for BOM, routings and milestone plans. Provides manufacturing support fixtures and dies.
- Process Development - Provides manufacturing support for prototypes, instructions and data analysis.
- Equipment Design, Build and Procure - Troubleshoots, validates and qualifies equipment.
- Cell and Standard Work Development - Conducts time studies. Develops cell layout
- Part Number Scrap Reduction and Yield Improvement - Collects data and analysis. Attends QSI meeting
- Floor Coverage and Support - Completes general daily process walk through. Collects data and analysis
- Standard Labor and Process Time Reduction - Analyzes shift labor efficiencies and affectivities. Conducts cost modeling. Implements tooling change
- Deviant Part Review and Disposition - Reviews scrap in all areas
Job Roles
- Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale
- Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully
- Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next
- Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions
- Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals
- Influence--leverages knowledge, relationship, data and perspective to persuade, educate and navigate; gains buy in and adoption of ideas and practices at scale; interacts with a variety of stakeholders
- Data informed--focused on things that drive quantifiable business outcomes; evaluates based on quantitative feedback; knows and explains the “why” behind actions
- Prioritized reaction--handles the unexpected without losing sight of important objectives; reacts where greatest leverage points exist
- Relationship--connects individually and with teams across shifts and practices; builds rapport and commonality; creates a “win together” ethic; serves as liaison between shop floor and engineering; keeps the pulse of the floor; helps people feel heard
Basic Qualifications:
- BS Degree in Engineering from an accredited institution
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
Preferred Qualifications
- Previous internship, co-op experience, or previous work experience in a manufacturing environment or lab environment.
- BS degree in Manufacturing, Industrial, Mechanical Engineering or Manufacturing Technology
- Experience in Kaizen, continuous improvement and formal problem solving.
- Excellent analytical skills, verbal & written communication skills (such as Standard Operating Procedure development)
- Ability to perform and analyze time studies to develop standardized work and set labor standards.
- Ability to create capacity analysis tools that capture machine cycle times, workloads and OEE.
- Experience in the implementation of improved manufacturing processes, such as new and better equipment (including defining scope of work, technology research, quote procurement from vendors, budget setting, equipment installation and start-up, project management of improvement projects)
- Experience in defining and implementing cell layout, plant layout and ergonomically designed workstations.
- Experience in export control regulations (commercial and/or military shipments across international borders)
- Utilization of observation skills to drive NVA (Non-Value Add) waste elimination, reduced operation cycle times and product flow analysis.
- Ability to provide technical leadership and guidance to the manufacturing areas through the use of cross-functional teams.
- Ability to read and interpret blueprints.
- Experience with CAD (2D and/or 3D)
Haystack's AI agent can fill in and submit this application for you. How AI auto apply works
Similar jobs
- ST

Manufacturing Engineer – CNC ProgrammerRecently posted Auto Apply
Stratolaunch · Mojave · Hybrid · Posted 15 Nov 2026 🇺🇸
AssemblyCAMCNC+1Manufacturing$68.3k - $173k/yr - ST

Systems/Mechanical Manufacturing EngineerRecently posted Auto Apply
Stratolaunch · Mojave · Hybrid · Posted 15 Nov 2026 🇺🇸
AssemblyAutoCADCAD+3Manufacturing$68.3k - $173k/yr - ST

Manufacturing Engineer – Tool DesignRecently posted Auto Apply
Stratolaunch · Mojave · Hybrid · Posted 15 Nov 2026 🇺🇸
AssemblyAutoCADCAD+3Manufacturing$68.3k - $173k/yr - ST

Structures/Mechanical Manufacturing Engineer- Sheet MetalRecently posted Auto Apply
Stratolaunch · Mojave · Hybrid · Posted 15 Nov 2026 🇺🇸
AssemblyAutoCADCAD+3Manufacturing$68.3k - $173k/yr - AR

Manufacturing EngineerRecently posted Auto Apply
Arcessio.ai · Oakland · On-site · Posted 16 Nov 2026 🇺🇸
RoboticsCADCNC+2ManufacturingSalary not listed - FC

Summer 2027 Internship - Manufacturing Engineering & Capital Projects InternRecently posted Auto Apply
Fanatics Collectibles · Sunnyvale · Hybrid · Posted 15 Nov 2026 🇺🇸
Microsoft ExcelContinuous ImprovementLean Manufacturing+1ManufacturingSalary not listed - VA

Manufacturing Engineering, PropulsionRecently posted Auto Apply
Vast · Long Beach · Hybrid · Posted 15 Nov 2026 🇺🇸
OnboardingSpringAssembly+3Manufacturing$86.1k - $122.2k/yr - TI

Production Supervisor - Robotics Assembly (2nd Shift)Recently posted Auto Apply
Tutor Intelligence · Watertown · Hybrid · Posted 15 Nov 2026 🇺🇸
5SLean Six SigmaSix SigmaManufacturingSalary not listed - TI

Manufacturing Test Engineer – Robotics Auto Apply
Tutor Intelligence · Watertown · Hybrid · Posted 8 Nov 2026 🇺🇸
RoboticsLeverPython+4ManufacturingSalary not listed - TI

Lead Hardware Engineer – Production Auto Apply
Tutor Intelligence · Watertown · Hybrid · Posted 30 Oct 2026 🇺🇸
RoboticsDesign for ManufacturingPCB Design+3TechnologySalary not listed - SA

Manufacturing Engineer Auto Apply
Scout Ai · Sunnyvale · On-site 🇺🇸
AssemblyCADInventory Control+1ManufacturingSalary not listed - F7
Staff Engineer, Electromechanical Systems Advance Manufacturing - Ranger (R6547)Recently posted Auto Apply
F7d8749a 72d6 407c Bf98 292ea630c73a · Seattle · On-site · Posted 13 Nov 2026 🇺🇸
Talent Acquisition5SRobotics+9TechnologySalary not listed