Quick overview
Job description
Position Overview
Tract Capital is seeking a Senior Power Systems Studies Engineer to lead electrical studies for large-scale power infrastructure serving data center campuses. The role will analyze the integrated system from the utility point of interconnection through HV/MV substations, behind-the-meter (BTM) generation, battery energy storage systems (BESS), campus distribution, and downstream data center loads.
The engineer will establish study methods and assumptions, build and validate models, perform or direct technical analyses, and translate results into actionable design, protection, control, and operating requirements. The work includes grid-connected and islanded operating modes, with BESS evaluated for defined applications such as load smoothing and peak shaving. BESS grid-forming, islanding, or backup-power capability must not be assumed unless included in the approved project design basis.
Key Responsibilities
Integrated Power-System Modeling and Studies
- Develop and maintain integrated models spanning the utility source, interconnection facilities, HV/MV substations, BTM generation, BESS, campus distribution, and data center blocks.
- Define study scope, model boundaries, operating cases, contingencies, assumptions, acceptance criteria, and data requirements; document model limitations and study conclusions.
- Perform and review load-flow and steady-state studies, including voltage profiles, losses, equipment and feeder loading, contingency performance, reactive-power needs, and generator/BESS dispatch and charging scenarios.
- Perform and review short-circuit and equipment-duty studies, including fault contributions from utility sources, synchronous generators, and inverter-based resources; verify interrupting, withstand, and bus ratings.
- Perform and review protection coordination, relay settings, breaker-failure and bus protection, grounding and zero-sequence analysis, arc-flash, and protection interfaces across utility, generation, storage, and campus systems.
- Analyze islanded-system stability and operating performance, including generation-load balance, frequency and voltage response, load steps and rejection, load shedding, generator dispatch, reserve requirements, black start, restoration, and resynchronization, as applicable to the design basis.
- Perform or direct RMS dynamic and electromagnetic transient (EMT) studies when appropriate, including generator and BESS controls, inverter interactions, fault response, switching and energization events, islanding transitions, and utility disturbances.
- Assess power quality and transient performance, including harmonics, resonance, flicker, voltage deviation, motor starting, transformer energization, switching transients, and interactions with sensitive data center loads.
- Evaluate BESS charging and discharging for load smoothing and other approved applications, including impacts on load ramps, generator operation, transformer and feeder loading, power quality, protection, and interconnection limits.
- Represent phased data center development and load characteristics in study cases, including block-level demand, large load steps, redundancy configurations, and changes in campus operating scenarios.
- Convert study results into practical requirements for equipment ratings, protection, grounding, controls, operating limits, interconnection, commissioning, and operating procedures.
Utility, EPC, OEM, and Project Coordination
- Coordinate technical study inputs and model exchange with utilities, independent system operators, EPCs, engineering consultants, generator and BESS OEMs, and controls vendors.
- Review utility and consultant studies, interconnection requirements, OEM models, equipment data, and design packages for technical consistency and alignment with project assumptions.
- Identify data gaps, interface risks, and conflicts among utility, generation, BESS, substation, and data center scopes; drive resolution with responsible parties.
- Support project development, design reviews, procurement, commissioning, and energization by communicating study findings, limitations, and open actions to technical and nontechnical stakeholders.
Required Qualifications
- Bachelor’s degree in electrical engineering or a related discipline; master’s degree in power systems is an advantage.
- 10+ years of relevant experience performing or reviewing power-system studies for utility, generation, transmission, substation, industrial, or mission-critical infrastructure.
- Demonstrated ability to conduct integrated studies across utility interconnection, HV/MV substations, synchronous generation, BESS/inverter-based resources, and large campus or data center loads.
- Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable:
- Integrated system and steady-state / short-circuit analysis: ETAP or equivalent, plus experience with a transmission planning tool such as Siemens PSS®E or GE PSLF.
- RMS dynamic stability: PSS®E, PSLF, PowerFactory, or an equivalent dynamic simulation platform.
- EMT and controls interaction: PSCAD, EMTP-RV, or an equivalent EMT simulation platform; ability to work with validated generator and BESS control models.
- Protection coordination and arc-flash: ASPEN OneLiner, ETAP, SKM PowerTools, EasyPower, or equivalent protection-analysis tools.
- Grounding: CDEGS/SES, ETAP, SKM, or equivalent grounding analysis tools.
- Engineering automation and data analysis: practical experience with Python, MATLAB/Simulink, or comparable tools for data processing, model QA, and repeatable calculations.
- Experience preparing, validating, or reviewing models and study reports; identifying assumptions and limitations; and explaining the implications for design and operation.
- Strong understanding of generator, inverter-based resource, relay, and control-system behavior relevant to grid-connected and islanded systems.
- Ability to interpret one-line diagrams, protection and control schematics, equipment specifications, utility requirements, and construction documents.
Preferred Qualifications
- Professional Engineer (PE) license or ability to obtain licensure.
- Experience with large data center campuses, mission-critical electrical systems, or phased high-density loads.
- Experience with reciprocating engine or gas-turbine generation, BESS integration, utility interconnection, and microgrid or islanded operation.
#LI-Hybr
Tract Capital Employment
Tract Capital employees enjoy competitive compensation and comprehensive benefits, including 100% employer-covered medical, dental, and vision insurance, a 401K program, standard paid holidays, and unlimited PTO.
NOTE: This job description is not intended to be all-inclusive. Employees may perform other related duties to meet the organization's ongoing needs.
Tract Capital is proud to be an Equal Opportunity Employer. Qualified applicants are considered for employment regardless of age, race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or veteran status. If you need assistance applying for any of our open positions, please contact us at info@tractcapital.com.
Haystack's AI agent can fill in and submit this application for you. How AI auto apply works
Similar jobs
- TA

Electrical Engineer (Senior/Staff), AvionicsRecently posted Auto Apply
True Anomaly · Denver · Hybrid · Posted 16 Nov 2026 🇺🇸
MATLABFPGAAssembly+4Technology$135k - $250k/yr - TA

Electrical Engineer II-III, AvionicsRecently posted Auto Apply
True Anomaly · Denver · Hybrid · Posted 16 Nov 2026 🇺🇸
MATLABAssemblyBudgeting+6Technology$90k - $165k/yr - LO

Electrical SuperintendentRecently posted Auto Apply
Loenbro · Wyoming · Hybrid · Posted 16 Nov 2026 🇺🇸
RecruitingComplianceFLSA+2ConstructionSalary not listed - AT

Electrical Designer/DrafterRecently posted Auto Apply
ALTEN Technology USA · Houston · Hybrid · Posted 16 Nov 2026 🇺🇸
Microsoft ExcelMicrosoft OfficeMicrosoft PowerPoint+6$75k - $85k/yr - WA
Electrical Substation EngineerRecently posted Auto Apply
Wadetrim · Taylor · Hybrid · Posted 13 Nov 2026 🇺🇸
Microsoft OfficeContinuous ImprovementElectrical Design+1EngineeringSalary not listed - WA
Power Distribution DesignerRecently posted Auto Apply
Wadetrim · Taylor · On-site · Posted 13 Nov 2026 🇺🇸
Salary not listed - WA
SCADA/I&C Professional EngineerRecently posted Auto Apply
Wadetrim · Tampa · Hybrid · Posted 13 Nov 2026 🇺🇸
Electrical DesignSCADAEngineeringSalary not listed - WA
Power Delivery Group LeadRecently posted Auto Apply
Wadetrim · Flint · On-site · Posted 13 Nov 2026 🇺🇸
Workforce PlanningPerformance ManagementRisk Management+1LogisticsSalary not listed - WA
Electrical Distribution Design Team LeadRecently posted Auto Apply
Wadetrim · Bay City · Hybrid · Posted 13 Nov 2026 🇺🇸
AutoCADBudgetingCompliance+1Operations & Project ManagementSalary not listed - WA
Transmission Line EngineerRecently posted Auto Apply
Wadetrim · Pittsburgh · Hybrid · Posted 13 Nov 2026 🇺🇸
AutoCADCivil 3DCompliance+1EngineeringSalary not listed - TT
Principal Analog/Mixed-Signal EngineerRecently posted Auto Apply
True Talent Solutions Partners · Boston · On-site · Posted 16 Nov 2026 🇺🇸
C++PythonEngineering$200k - $325k/yr - TT
Electrical EngineerRecently posted Auto Apply
True Talent Solutions Partners · Santa Clara · On-site · Posted 16 Nov 2026 🇺🇸
GitFPGAAltium+2Engineering$160k - $180k/yr