Electrical QA Resident Engineer

Electrical QA Resident Engineer - Cardiff - 1 year ++ contract
Role Overview
We are seeking an experienced Electrical QA Resident Engineer to provide independent and structured technical quality assurance across the electrical building services installations for a prestigious project in Cardiff. The role will provide progressive inspection and technical review throughout the construction period, with the objective of identifying non-conforming works, workmanship issues and departures from the approved project requirements at the earliest practical opportunity.

The Electrical QA Resident Engineer will act as an important link between the design, quality and construction teams, ensuring that the installed electrical services reflect the approved design intent, Employer's Requirements, project specifications, technical submissions, benchmarks and applicable standards. This is a design and technically focused QA role, rather than a purely inspection or snagging position.

The successful candidate must be capable of reading and understanding electrical design specifications, drawings and technical submissions and applying that knowledge when assessing installations on site. The project QA period is anticipated to run from Q3 2026 through Q2/Q3 2028, subject to the development of the project programme.

Key Responsibilities
Design & Technical AssuranceReview and interpret electrical design specifications, Employer's Requirements, drawings, schedules and approved construction information. Review electrical design information and understand the intended performance and installation requirements of the systems. Assess installed works against the latest approved construction information available within the project document management system. Review approved technical submissions, equipment data, manufacturers' requirements and material approvals.

Verify that approved materials and equipment are being installed and that installations generally reflect the approved technical submissions. Review benchmark installations and sample areas against the Employer's Requirements and project specifications. Confirm alignment between approved benchmarks, specifications, drawings, technical submissions and installed works. Identify discrepancies, omissions, non-conformances and potential quality issues at an early stage.

Provide technically informed input where installation issues arise and liaise with the design and project teams where clarification is required. Identify issues which may affect subsequent testing, commissioning, completion or handover. Review electrical design coordination with mechanical, public health, architectural and structural elements.

Electrical Installation QACarry out progressive site inspections of electrical building services installations, including, as applicable:LV distribution systemsMain and sub-main distributionDistribution boards and switchgearSmall power installationsLighting and emergency lightingContainment systems, including cable tray, trunking, conduit and associated supportsLV cabling and wiring systemsEarthing and bondingElectrical plant and equipment suppliesGenerator and standby power systemsUPS systemsLife safety and essential power systemsFire alarm electrical installations and interfacesAccess control and security system interfacesData and containment infrastructureBMS and controls interfacesSpecialist electrical systemsExternal electrical installations and associated infrastructure
Inspections shall include consideration of:Workmanship and installation qualityCompliance with approved drawings and specificationsCorrect materials and equipmentContainment, supports, brackets, fixings and secondary steelworkCable installation, routing, segregation and identificationTerminations and connectionsEquipment installation and manufacturer requirementsAccessibility and maintainabilityService identification and labellingEarthing and bondingCoordination with other MEP servicesFire-stopping associated with electrical penetrationsProtection of completed installationsCleanliness and protection of electrical equipmentReadiness for testing and commissioning
Progressive Inspection & Quality ControlReview Inspection and Test Plans (ITPs) and associated quality checklists within the system for completeness and compliance.

Undertake progressive inspections at appropriate stages of construction. Inspect installations before concealment, including prior to closure of:oCeilingsoWallsoRisersoShaftsoBuilders' work openingsoPlantroomsoElectrical roomsoOther restricted-access areasIdentify defects and non-conforming works before they become inaccessible. Raise and record Quality System Observations (QSOs), snagging items and other quality observations. Establish appropriate target close-out dates and monitor progress.

Re-inspect completed works following notification from subcontractors that items are ready for inspection. Verify close-out based on physical re-inspection and supporting evidence, rather than relying solely on subcontractor confirmation. Provide photographic evidence and supporting records for inspections and close-out activities. Verify that approved workmanship standards and benchmarks continue to be maintained throughout the project. Equipment & Material VerificationReview technical submittals and supporting documentation against ITP requirements and installed equipment.

Verify that approved materials, equipment and products are being installed. Review manufacturers' installation requirements for major electrical equipment. Confirm through site inspection that equipment has generally been installed in accordance with approved manufacturer requirements.

Verify specialist installation requirements including:oEquipment positioningoAlignmentoLevel and mountingoCable entryoTerminationsoEquipment clearancesoVentilation requirementsoAccess requirementsoMaintenance requirementsVerify appropriate labelling and identification of electrical equipment, distribution boards, circuits and systems. Verify circuit and equipment identification against approved drawings and schedules. Check that electrical equipment and installations are suitably protected from damage, contamination and deterioration during construction.

Coordination & MaintainabilityReview electrical installations for appropriate coordination, accessibility and maintainability. Confirm access is available to maintainable components including:oDistribution boardsoSwitchgearoIsolatorsoControl equipmentoLighting equipmentoEmergency lightingoElectrical plantoBMS interfacesoOther maintainable componentsIdentify issues where services have been installed in a manner that may restrict access, maintenance or future operation. Identify coordination issues with mechanical, public health, architectural and structural services.

Review containment routes and service coordination to ensure appropriate access and installation quality. Identify potential issues relating to cable segregation, service clearances and accessibility. Attend relevant MEP coordination, quality and subcontractor meetings where technical quality issues require review or resolution. Testing & CommissioningReview electrical testing and commissioning requirements against the approved design and project specifications. Monitor the quality and completeness of electrical testing and inspection activities.

Review relevant testing documentation and records. Verify that testing has been undertaken in accordance with approved procedures and applicable requirements. Identify incomplete or unacceptable testing records. Monitor outstanding testing issues which could affect commissioning or handover. Provide QA input into the progressive completion and commissioning of electrical systems. Review electrical installation quality prior to energisation where appropriate. Quality Management & ReportingMaintain an accurate and auditable record of electrical QA activities.

Maintain the electrical QA dashboard/tracker, recording:oInspections undertakenoOpen QSOsoSnagging itemsoOverdue actionsoClosed itemsoRecurring defectsoTrends by subcontractoroTrends by systemoTrends by areaMonitor recurring defects and workmanship trends. Identify repeated non-conformances and report areas requiring corrective action or additional quality controls. Provide regular photographic records of inspections, defects and close-out.

Prepare regular monthly electrical QA reports summarising:oInspections completedoKey quality concernsoRecurring defectsoOutstanding QSOsoAgeing of open actionsoOverdue itemsoAreas of concernoRisks to completion, testing, commissioning or handoverProvide timely escalation of significant quality concerns to the client. Client & Employer InspectionsPrepare a rolling two-week look-ahead programme of planned client inspections. Coordinate client and Employer inspections with the relevant project teams and subcontractors.

Prepare inspection reports identifying observations, defects and required actions. Coordinate inspection invitations and maintain evidence that the client/Employer was provided with the opportunity to attend. Obtain attendance/sign-off records where required. Maintain all relevant supporting correspondence and inspection records.

Attend and facilitate weekly site quality meetings, providing updates on:oElectrical inspectionsoQSOsoDefect statusoInspection progressoOutstanding and overdue actionsoClient inspection sign-offsoRecurring quality issuesoRisks to subsequent worksoTesting and commissioningoCompletion and handoverProgressive HandoverSupport the progressive handover of the electrical installations. Review outstanding electrical defects and QSOs. Re-inspect items reported as complete and verify satisfactory close-out. Confirm that quality records are complete and auditable.

Identify outstanding issues which may present a risk to testing, commissioning, completion or handover. Support the project team in achieving progressive completion rather than allowing quality issues to accumulate towards the end of the project.________________________________________Technical RequirementsThe successful candidate must be able to demonstrate a strong understanding of electrical building services design and installation. They should be able to:Read and interpret detailed electrical design drawings. Read and understand electrical design specifications and Employer's Requirements.

Understand electrical design intent and assess whether the physical installation reflects that intent. Review technical submissions and manufacturers' information. Identify discrepancies between drawings, specifications, technical submissions and installed works. Understand LV distribution and electrical building-services systems. Understand containment systems and cable installation requirements. Review electrical equipment, switchgear and distribution systems. Understand lighting, emergency lighting and small power installations. Understand earthing and bonding requirements.

Understand electrical coordination with mechanical and public health systems. Review electrical plantroom and electrical room installations. Assess accessibility and maintainability of electrical installations. Identify potential issues before systems become concealed or inaccessible. Understand requirements for electrical inspection, testing, commissioning and handover. Identify installation issues which could adversely affect testing, energisation or system performance.

Demonstrate sound engineering judgement when assessing quality issues.________________________________________Experience & QualificationsEssentialDegree, HNC/HND or equivalent qualification in Electrical Engineering, Building Services Engineering or a related discipline. Significant experience in electrical building services. Previous experience in either:oElectrical Design Engineering; oroElectrical QA/QC Engineering or Management with strong technical/design experience. Proven experience reviewing electrical drawings, specifications and technical submissions.

Strong understanding of electrical building-services installation. Experience working on major construction projects. Experience with progressive inspection and quality assurance. Experience raising and managing quality observations, defects or NCRs through to close-out. Strong understanding of ITPs and inspection processes. Ability to work independently and provide objective technical assurance. Strong communication and reporting skills. Excellent IT literacy. DesirableExperience on large-scale commercial, hospitality, entertainment or mixed-use developments.

Previous experience on an arena, stadium, hotel or complex public building project. Experience with complex LV distribution and electrical infrastructure. Experience with generators, UPS systems and essential/standby power. Experience with life safety systems and associated electrical interfaces. Experience with testing and commissioning processes. Knowledge of relevant British Standards, BS 7671, CIBSE guidance and applicable legislation. Experience using a digital construction/quality management platforms. Experience with BIM and digital coordination platforms.

Working knowledge of AutoCAD, Revit, Navisworks or similar software. Relevant QA/QC or quality management qualifications. Chartered or Incorporated Engineer status, or working towards professional registration.________________________________________IT & Digital CompetenceThe role requires a high level of IT and digital competence.

The successful candidate should be comfortable working within a digital construction environment and using:Microsoft WordMicrosoft ExcelMicrosoft OutlookPDF/drawing review softwareDigital document management systemsCommon Data Environments (CDEs)BIM/3D coordination platformsExperience with AutoCAD, Revit and/or Navisworks would be advantageous.

The candidate must be able to maintain accurate digital records and produce clear, professional reports and trackers.________________________________________Candidate ProfileThe successful candidate will be a technically competent electrical engineer who can operate confidently between design documentation, site inspection and quality management.

We are particularly interested in candidates from one of two backgrounds:Electrical Design EngineerAn electrical design engineer who has moved into, or has an interest in, technical assurance and site-based quality, and who can apply their understanding of design intent to construction. Electrical QA/QC Engineer or ManagerAn experienced electrical QA/QC professional who has strong technical and design knowledge and is capable of reviewing specifications, drawings and technical submissions rather than simply undertaking checklist-based inspections.

In either case, the individual must be able to read the design, understand the specification, inspect the installation and make a technically informed assessment of compliance.________________________________________Key Personal AttributesThe successful candidate will be:Technically strong and engineering-ledDesign focused rather than purely inspection focusedThorough and detail orientedConfident reviewing drawings and specificationsComfortable challenging non-conforming workIndependent and objective in their approachProactive in identifying potential issues before they become defectsStrong in communication and stakeholder managementOrganised and methodicalComfortable working directly with subcontractors and project teamsConfident presenting quality issues at project and site meetingsDigitally and IT literateAble to manage multiple inspections, actions and prioritiesPractical and solutions focusedFocused on achieving quality progressively rather than relying on end-of-project inspection